Recommendation
SeaDeal helps diagnose installation, tank geometry and medium conditions before replacing the instrument.
Comparison table
| Criteria | Recommended option | Alternative option |
|---|---|---|
| False echo | Check nozzle, tank wall, agitator and internal ladder reflections. | Use echo mapping or adjust mounting position. |
| Foam or vapor | Review radar frequency and medium behavior. | Consider guided wave radar when foam dominates and probe is acceptable. |
| Wrong setup | Verify empty distance, full distance, blind zone and output scaling. | Do not replace hardware before checking configuration. |
Application scenarios
Chemical tank radar readings can drift or jump because of foam, vapor, nozzle interference, agitators, false echoes, low dielectric medium or wrong empty/full calibration.
Problem summary: Chemical tank radar readings can drift or jump because of foam, vapor, nozzle interference, agitators, false echoes, low dielectric medium or wrong empty/full calibration.
Related product categories
- Level Measurement — Radar level meters, ultrasonic level meters, magnetic level gauges, float switches and hydrostatic transmitters for tank and silo monitoring.
Selection guide
- Record the error pattern and tank condition.
- Check mounting angle, nozzle and internal obstruction.
- Verify empty/full calibration and output scaling.
- Send photos, tank sketch and medium data for diagnosis.
Data to send for a fast quote
- Tank photo
- Tank height
- Nozzle details
- Medium
- Error pattern
- Current model
Frequently asked questions
Why does radar level meter show wrong reading?
Common causes include false echoes, foam, vapor, poor mounting, incorrect calibration and unsuitable radar frequency.
Should I replace the radar level meter immediately?
Not always. First check mounting, false echoes, empty/full setup and medium conditions.